After the intake manifold was removed and set off to the side the next thing I needed to remove was the thermostat and the starter. They were very straight forward to remove both coming off with only a few normal 10mm bolts. The starter was in pretty bad shape, it had a chunk of metal missing and was dented.
Both of these pieces went to the side and again the bolts were bagged and carefully labeled.
Both of these pieces went to the side and again the bolts were bagged and carefully labeled.
 |
| Thermostat housing. |
 |
| Thermostat housing once removed. |
 |
| Starter. |
 |
| Inside the starter. |
No comments:
Post a Comment